Enameled Flat Aluminum Wire are widely used in electric devices because of their conductivity. LP industry can produce the width 25mm enameled flat aluminum wire

Enamel insulated aluminium wire typically uses one to three layers of polymer film insulation, often of two different compositions, to provide a tough, continuous insulating layer. Magnet wire insulating films use (in order of increasing temperature range) polyvinyl formal or Formvar (PVF), polyurethane, polyamide (PUW), polyester (PEW), polyester-polyimide (EIW), polyamide-polyimide (or amide-imide) (AI-EIW), and polyimide (AIW). Polyimide insulated magnet wire is capable of operation at up to 250°C. 

The advantages of enameled aluminum wire:
Aluminum enameled wire is simpler to form coils compared with copper enameled wire, because the surface of aluminum enameled wire features a strong oxide film, which has good insulation effect and long service life.
The most important advantage of using aluminum wire is light 1/3 due to copper wire, greatly reducing cost , and straightforward to connect to solid. It also can reduce the operation of freight and transportation.

Application areas:
microwave transformer;
It's used for creating windings that need light weight, relatively high conductivity and good heat resistance, especially for winding high frequency signals.
High frequency transformer, common transformer, inductor coil, motor, household motor and electromagnetic wire for micro motor.
Small motor rotor and other enameled wire.
Display deflection coil with electromagnetic line;
Electromagnetic wire for degaussing coil;
Other special electromagnetic lines
Automotive: from window regulators and electrified steering drives to ABS and transmission controls – we provide enamelled wires for all electric components of vehicles.
Renewable Energies: since the beginning of the energy revolution we are part of the industry as a supplier and partner of major manufacturers of wind turbines and photovoltaic systems.

Enamelled flat alu wire technical parameters:

Name	Enameled Rectangular Aluminum Wire
Conductor	Aluminum
Dimension	Thickness(a):0.8-8.0mm; Width(b):2.0-25mm
Thermal Class	120(Class E), 180(Class H), 200(Class C), 220(Class C+), 240(Class HC)
Insulation Thickness:	single build, heavy build
Standard	IEC 60317-16,60317-16/28,MW36 60317-29 BS6811, MW18 60317-18 ,MW20 60317-47
Certificate	UL
Packing	30kg-150kg ply-wood spool(250*400 / 250*500/ 250*600/ 250*730)

Class 200 Enamelled flat aluminium wire, thermoresistant
insulated with THEIC mod. polyesterimide with polyamide-imide topcoat
Enamelled Flat Alu Wire is a highly thermoresistant rectangular enamelled aluminium wire of heat performance class N with a wide range of good to very good quality features. Its insulation film consists of 2 different coatings on top of one another. These ensure a very good permanent thermal and overload resistance, excellent resistance against mechanical stress, as well as an excellent resistance to chemical attacks of commercial washing and cleaning agents, impregnating varnishes and resins, sealing compounds, thinners, solvents and refrigerants, oils as well as their vapours. 

Also you can custom the fiberglass covered flat aluminum wire, paper covered flat enameled aluminum wire, CTC AL Conductor, etc.

Previous：1.2mm - 10mm Enameled Round Aluminum Wire
Next：0.45-6mm Enameled Square Aluminum Wire