The chemical composition of 1050 Series Aluminum Strip For transformer Winding is Al99.5%, which has high conductivity and low price, and has become an indispensable material for power transformers.
The transformer 1050 aluminum foil can be used not only for low voltage dry type transformers, but also for oil immersed transformers and high voltage transformers.
The electrical conductivity of the 1050 aluminium foil strip is up to 61.0-63.0%, which meets the national standard and can meet the requirements of transformers winding under different voltages and frequencies.

The main advantages of 1050 aluminum foil strip for transformer winding are as follows:
The surface quality of the foil is high and the conductivity is good
After annealing, the elongation of the foil can reach 1% or more
The shape of the foil is good, the thickness tolerance is small, the width tolerance is ± 0.2mm, and the thickness control can be controlled below ± 5 microns
The annealed foil has good plasticity and can be stretched into a cylindrical shape without cracks during winding

Dimensions of 1050 Aluminum foil strip

Thickness	Nominal Width
	≤100	>100--300	>300--500	>500--1250	>1250--1650	>1650--2000
	Width Tolerance (+)
>0.20--0.60	0.5	0.6	1	3	4	4
>0.60--1.00	0.5	0.6	1	3	4	4
>1.00--3.00	0.5	0.6	1	3	4	4

Chemical Component :

Elements	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others	Al
%	0.25	0.4	0.05	0.05	0.05	-	0.07	0.05	0.15	99.5

Mechanical properties :

Temper	Tensile Strength (Rm/MPa)	Yield Strength (MPa)
1050-O	65-95	Min20
1050-H12	85-125	Min65
1050-H14	105-145	Min85
1050-H16	120-160	Min100
1050-H18	Min135	Min120

Previous：1060 Transformer Aluminum Foils
Next：Back to list